Workshop Service Pits
Wash Machines
Jacking Systems
Diagnostics
Lubrication
Prefabricated RMS inspection pits
Hartex Engineering has a range of prefabricated service pits specifically designed for inspection and compliance testing of heavy vehicle fleets. Hartex is the ONLY Australian manufacturer of drop-in service pits. Beware of claims by other manufacturers who state their pits are locally built when in fact they are low quality imports.
All RMS inspection pits are prefabricated in our purpose built manufacturing facility in Sydney. The steel work is then transported to the site where it is assembled, levelled and concreted in.
Design & Build
An average 20m long pit takes 6 weeks to build on site. A Hartex drop in service pit can be installed within 4 days.
The pre-fabricated pit is constructed off-site and then craned into position and concrete poured around it.
drop-in diagnostic bay
The Hartex ‘drop-in” diagnostic bay is an innovative solution designed to reduce upfront capital costs.
We can design and build a commercial RMS test station at your depot, or if you want to self certify your own fleet.
Consider this very important test if you are planning to build your very own RMS pit. First ask your friendly RMS inspector for their advice on what type of brake test machine or pit system to install. In most cases this important investigative work will lead you to Hartex Engineering.
Due to the nature of their work RMS inspectors get around and have first hand experience of the disastrous results endured by other operators who have chosen to install some questionable equipment with little history in the Australian market.
At Hartex you are dealing with experienced professional engineers who have been installing workshops throughout australia for over 35 years. Call us today on 1300 881 383 and we can discuss options on how to make your RMS service pit vision into a very affordable reality.
